How to prepare CDR report for Electrical Engineers for Skill Assessment?
Engineers who want to move to Australia but have an overseas Engineering degree that is not certified to the Washington Accord, Dublin Accord, or Sydney Accord must prepare a (Competency Demonstration Report) CDR Report for electrical engineers for the migration skills assessment. Engineers who wish to live and work in Australia for better opportunities must be accepted by Engineers Australia through the Migration Skills Assessment process.
MSA acknowledges degrees earned at designated Australian Institutions of Higher Learning or in countries that are complete signatories to the Sydney Accord, Dublin Accord, or Washington Accord. As a result, applicants from countries other than those included in the above accords must apply for a CDR for skill assessment.
Table of Contents
CDR report for Electrical Engineers
Electrical engineering is the leading engineering discipline that includes the research and application of electromagnetism and electric power. The electrical engineering scope is high in Australia. Electrical Engineers from other countries who want to advance their careers in Australia must go through a CDR evaluation by EA to be chosen for occupation ANZSCO 233311.
Electrical Engineers are responsible for planning, producing, and supervising the production, construction, service, and maintenance of machinery, devices, and systems used in the generation, delivery, use, and control of electrical energy. Some of the duties that electrical engineers fulfill are defined below:
- The power station and power generation equipment preparation and configuration specifying the type and configuration of circuits, transformers, circuit-breakers, transmission lines, and other equipment
- manufacturing items such as electric motors, parts, equipment, and appliances
- interpreting electric power equipment and usage requirements, sketches, standards, and regulations
- coordinating and controlling the services used in the procurement of electrical parts, computers, installations, and machinery
- determining arrival and installation dates for equipment, switchgear, wires, and fittings
- supervising and maintaining power sources, transmission and delivery facilities, and manufacturing plants
- designing and installing control and signaling equipment for road, rail, and air traffic may specialize in generation and transmission systems, transformers, switchgear, electric motors, telemetry, and monitoring systems.
CDR Report format for Electrical engineer
1. Career episode
Each career episode should be between 1500 and 2500 words long. The three career episodes should highlight and concentrate on clarifying professional obligations (personal positions in the project) so that the engineering experience and skills are visible.
Instead of needless elaboration or duplication of related sentences, there should be plain vocabulary, tense, and sentence structure, free of jargon and descriptions, and to the point.
Electrical Engineer Career Episode Sample 1
Project Name: Hybrid Inverter Design and Analysis
In the first Career Episode titled “Hybrid Inverter Design and Analysis,” applicants will have to fulfill the following duties and responsibilities throughout the project:
- To do a literature review for the technological expertise required to work on the project and learn about new renewable energy sources.
- To investigate the components and create a schematic diagram that provides a thorough understanding of the project.
- To finalize the elements that can be included in the framework and prepare how to include them in the project based on the specifications.
- To code and upload it to the microcontroller using PIC C and simulate using PIC SIMULATOR IDE 6.83.
- To provide work for the circuit’s implementation.
- To carry out the hardware installation of the circuit and evaluate the overall device.
Electrical Engineer Career Episode Sample 2
Project Name: Using an Adaptive Differential Relay to Protect a Transformer
In the second Career Episode titled “Using an Adaptive Differential Relay to Protect a Transformer,“
applicants will have to fulfill the following duties and responsibilities throughout the project:
- To do a study of the literature on power transformers, differential relays, and their current implementations.
- To use MATLAB to build a model of a test device.
- To gather the necessary components and compute the weighing factors and differential current of the proposed device.
- To divide a set of characteristics into several regions.
- In MATLAB, arrange and simulate an adaptive decision logic algorithm.
- To study and model the flaws and failures in various devices.
- To review the whole project’s operations and progress and write a concise final report.
Electrical Engineer Career Episode Sample 3
Project Name: Transformer Differential Relay 7sr2423 and Directional Overcurrent Relay 7sr2203 Testing and Retrofitting
In the third Career Episode titled “Transformer Differential Relay 7sr2423 and Directional Overcurrent Relay 7sr2203 Testing and Retrofitting,” applicants will have to fulfill the following duties and responsibilities throughout the project:
- To do a site analysis and a complete overview of the planning and retrofitting stages.
- To consult with the client’s relevant group to address and refresh their specifications.
- To plan and carry out primary lab research on each relay using the default relay settings.
- Hold a brainstorming session with engineers and discuss information by doing necessary calculations for relay file settings.
- Secondary and final checking of each relay using measured values
- To carry out relay commissioning and retrofitting. At the same time, plan wiring diagrams for the relay panel.
Learn More: The Ultimate Guide to Write a Professional Career Episode 📖✈️
2. Summary Statement
The first-person narrative should be used just as in the career episode of CDR Report for electrical engineers. The summary statement should be at least 900 words long, and it should consist of a summary of all three career episodes.
You should avoid copying any of the terms from career episodes; just a few sentences should be drawn from it, and the remainder of the information should be clarified concisely. You should describe all the elements and competency elements for a proper report. Here are some things that you as an electrical engineer must consider.
Academic engineering background
During your academic year, you must have all applicable information about your engineering background. Mention all of the honors and credits you’ve earned during your engineering career. If you have worked on some projects throughout your engineering career, briefly explain how you dealt with the challenge and came up with a workable solution.
Technical Professional background
Mention your industry experience. Mention the names of all the companies for which you’ve served, as well as the jobs you’ve held. Please have a brief overview of any issues you had while dealing with them and how you dealt with them. All of the activities on which you worked should be listed.
The additional course works and certificate programs
Mention any other degrees or courses you’ve taken outside of your undergraduate study. A significant number of students participate in online educational classes. If you have completed some coursework, lectures, or other events, provide the detail in your statement. This will indicate to the EA assessors your level of interest in your subject.
3. Continuing Professional Development (CPD)
Continuing professional development is the method of having the EA assessors up to date with your engineering career’s latest advancements. All of the skills and experience you learned through your college years can be reflected in your CPD of CDR Report for electrical engineers.
CPD serves as a connection between all of your methods, theories, and strategies for professional development in the field of engineering. Look out for these essential things before preparing your CPD.
- It should be written in a tabular format with short explanations.
- It must be written on one A4 page and must not be longer than one page.
- It is not necessary to append course and event certificates.
- Explain if you used software or coding techniques during your training/working days.
- Provide a CPD statement outlining your qualifications, current job position, abilities, and other significant professional accomplishments.
Why choose professional Writers?
CDRReportWriters.com is an Australian-registered business, and we are familiar with Engineers Australia‘s requirements and always keep up with the latest changes. It is in your best interests if your CDR Report for electrical engineers is written by a writer who has experience in Electrical Engineering rather.
Thus, selecting a writer with a thorough knowledge of the engineering profession you want to apply for, the technicalities associated with that occupation, and excellent English language skills is critical in preparing a successful CDR. We have Engineers from various fields who have extensive expertise in writing a great CDR report for electrical engineers.